rotating shaft การใช้

• Adjusting the speed of the rotating shaft alters the frequency of rapping.
• Similar problems arise when applying LDV to rotating shafts, crankshafts for example.
• The lower-unit housing contained a flexible inner rotating shaft.
• The rotating shaft creates an electrical signal proportional to the cable's linear extension or velocity.
• The result was non-rotating shafts, which gave a quieter sound and less friction on moving parts.
• Like a mammoth grandfather clock, Cloud Catcher houses humming gears and electric generators and rotating shafts.
• A drive belt, or a rotating shaft would be expensive and have very high friction losses.
• Commonly, torque sensors or torque transducers use strain gauges applied to a rotating shaft or axle.
• In the simplest application, clutches connect and disconnect two rotating shafts ( drive shafts or line shafts ).
• The rotating shaft ran to the " wind bar " located in front of the body of the gunsight.
• The rotating shaft is connected to an electrical generator which converts the motion of the shaft into electrical energy.
• The modification consisted of mounting the motor behind the control panel with its rotating shaft extended through the panel.
• Most practical mechanical analog computers of any significant complexity used rotating shafts to carry variables from one mechanism to another.
• Another category, not nearly as well known, used rotating shafts only for input and output, with precision racks and pinions.
• The current generated in the magneto is transmitted by wires attached to the rotating shaft to the dynamo's rotating field coil.
• When a pump operates, the liquid could leak out of the pump between the rotating shaft and the stationary pump casing.
• The two propellers are powered by two meshing and counter-rotating shafts, powered by helical gear wheels running in an oil bath.
• Occasionally some of the bearings that held the rotating shaft would wear out, Houghtaling says, and those units simply ceased to vibrate.
• The " Auto-Meter " used a magnet attached to a rotating shaft to induce a magnetic pull upon a thin metal disk.
• For instance, they are able to levitate a rotating shaft and permit relative motion with very low friction and no mechanical wear.